Truck Mounted Models
DC & AC Patchers
Truck Mounted Models
Our top of the line, fully equipped asphalt patcher. Permanently mounted on any chassis. One machine for all of your year-round patching needs. Available with a variety of options and container capacities to meet your exact specifications.
AR400 steel Dual and Single auger systems.
LPG air radiant heat system with adjustable thermometer and auto ignition in a fully insulate container.
Pump or air compressor system available with many options.
Vast array of additional accessories to increase productivity.
|Auxiliary Electric Heat Patcher||6KW, 240V, overnight heating of asphalt|
|Alternative Heating Sources||Full electric heaters, CNG burner, Diesel burner|
|Compactor/Roller Lift Platform||Hydraulic lift for compactor plates or vibratory rollers|
|Jack Hammer Systems||Air and hydraulic systems available|
|Tool Baskets and Boxes||Various sizes and types available|
|Spoils Bin||Bin for spoils with discharge door|
|Solvent Wand||Wand with 25’ hose for cleaning tools and equipment|
|Air Wand||Wand with 25’ hose for removing debris|
|Cab Controls||Controls in cab to operate top lids|
|Rear LED Arrow Board||Whelen and many other brands available|
|LED Flashers and Work Lights||Whelen and many other brands available|
|Hose Reels||Reels for emulsion, hand torch, solvent, air wand, and jackhammer|
|Pivotal Asphalt Chute||Pivoting, mounted at rear|
|Tool Holders||Asphalt lute, shovel holders, traffic cones, jackhammer|
|Work Deck||Safety grip deck with ladder and handrails for accessing hopper|
|Compactor Plates and Hammers||Many name brands available|
Our products provide easy loading and unloading to help our customers get the heaviest work done without too much hassle. PB loader’s equipment is built to thrive.
1.8 cubic yards with double wall construction. High density insulation throughout. 45° sloping 3/16 GA steel floor. Double door top lids open into a “V” with inside surface acting as a funnel.
Discharged by a belt over chain, 24” wide conveyor system. High temperature, heavy duty, multiply, 18″ wide Kevlar® belt riveted onto every other crossbar by four rivets. Belting shall have WearGuard® coating and sealed ends for lacing. Reinforced and designed to withstand 800ºF and harsh cleaning solvents. Forward and reverse controls.
Propane fueled casted manifold burner(s) with flume adjustment. Thermostatically controlled and 12-volt electronic igniters. 100% fuel shut off if burner is extinguished. Burner area fully enclosed and located at front of unit safely away from rear operation.
Truck mounted with heavy duty tie down brackets. Hand torch with 25’ hose. Shoveling apron with folding bottom. 25-gallon LPG tank.
Emulsified asphalt spray and storage system mounted on truck chassis for applying tack coat. Powered by compressed air. Round ASME tank with T-bolt cap, fill strainer basket, and discharge Y-strainer. Wand and 25-foot hose. Standard air flush and optional solvent flush with 15-gallon tank. 10-gallon waste tank. Optional overnight auxiliary heating system.
Emulsified asphalt spray and storage system mounted on truck chassis for applying tack coat. Powered by hydraulic emulsion pump. Two-compartment tank for emulsion and solvent, fill strainer basket, and discharge Y-strainer. Wand and 25-foot hose. Standard solvent flush. 10-gallon waste tank. Standard overnight auxiliary heating system.
Need a quote?
Contact us today for a quote on your next patcher.
Parts & Service Department
Our fully prepared team is ready to respond and committed to provide the highest level of service. We are invested to minimize downtime and solve issues quickly.