Model BC 1.8

BC Patcher

Model BC 1.8

Overview

PB Loader offers high quality BC patchers to complete jobs efficiently. Our Model BC 1.8 patcher is one of the most effective tools for asphalt patching.

Conveyors

Kevlar belt conveyor or steel slat chain conveyor.

Heating System

LPG air radiant heat system with adjustable thermometer and auto ignition in a fully insulate container.

Emulsion System

Pump or air compressor system available with many options.

Optional Accessories

Vast array of additional accessories to increase productivity.

Product Images

Optional Equipment

EquipmentDescription
Auxiliary Electric Heat Patcher6KW, 240V, overnight heating of asphalt
Alternative Heating SourcesFull electric heaters, CNG burner, Diesel burner
Compactor/Roller Lift PlatformHydraulic lift for compactor plates or vibratory rollers
Jack Hammer SystemsAir and hydraulic systems available
Tool Baskets and BoxesVarious sizes and types available
Spoils BinBin for spoils with discharge door
Solvent WandWand with 25’ hose for cleaning tools and equipment
Air WandWand with 25’ hose for removing debris
Cab ControlsControls in cab to operate top lids
Rear LED Arrow BoardWhelen and many other brands available
LED Flashers and Work LightsWhelen and many other brands available
Hose ReelsReels for emulsion, hand torch, solvent, air wand, and jackhammer
Pivotal Asphalt ChutePivoting, mounted at rear
Tool HoldersAsphalt lute, shovel holders, traffic cones, jackhammer
Work DeckSafety grip deck with ladder and handrails for accessing hopper
Compactor Plates and HammersMany name brands available

General Info

The Model B.C 1.8 is a top engineered asphalt patcher designed to get jobs done under high-pressure conditions. Its state-of-the-art features enhance each task.

1.8 cubic yards with double wall construction. High density insulation throughout. 45° sloping 3/16 GA steel floor. Double door top lids open into a “V” with inside surface acting as a funnel.

Discharged by a belt over chain, 24” wide conveyor system. High temperature, heavy duty, multiply, 18″ wide Kevlar® belt riveted onto every other crossbar by four rivets. Belting shall have WearGuard® coating and sealed ends for lacing. Reinforced and designed to withstand 800ºF and harsh cleaning solvents. Forward and reverse controls.

Propane fueled casted manifold burner(s) with flume adjustment. Thermostatically controlled and 12-volt electronic igniters. 100% fuel shut off if burner is extinguished. Burner area fully enclosed and located at front of unit safely away from rear operation.

Truck mounted with heavy duty tie down brackets. Hand torch with 25’ hose. Shoveling apron with folding bottom. 25-gallon LPG tank.

Emulsified asphalt spray and storage system mounted on truck chassis for applying tack coat. Powered by compressed air. Round ASME tank with T-bolt cap, fill strainer basket, and discharge Y-strainer. Wand and 25-foot hose. Standard air flush and optional solvent flush with 15-gallon tank. 10-gallon waste tank. Optional overnight auxiliary heating system.

Emulsified asphalt spray and storage system mounted on truck chassis for applying tack coat. Powered by hydraulic emulsion pump. Two-compartment tank for emulsion and solvent, fill strainer basket, and discharge Y-strainer. Wand and 25-foot hose. Standard solvent flush. 10-gallon waste tank. Standard overnight auxiliary heating system.

Need a quote?

Contact us today for a quote on your next patcher.

Need Help?

Parts & Service Department

Our fully prepared team is ready to respond and committed to provide the highest level of service. We are invested to minimize downtime and solve issues quickly.