Search Results for: https://www.tempcontrolpack.com/id/knowledge/common-insulation-box-materials-and-their-respective-characteristics-2/张A1g

Model DA-3SM

…Hydraulic system is powered by a 25 H.P. LPG engine Starter generator with 12 volt, 50 AMP battery Unit of box is 82″ O.D. Length of box is 120″ I.D….

Model DA-4SM

…Hydraulic system is powered by a 25 H.P. LPG engine Starter generator with 12 volt, 50 AMP battery Unit of box is 82″ O.D. Length of box is 120″ I.D….

Model DA-3HL

…be used for patching with hot asphalt. Container: Unit shall be 3 cubic yards Double wall constructed 2” – 6 lb. density insulation throughout 3/16 GA HR steel interior sides,…

Model DA-6SM

…Hydraulic system is powered by a 25 H.P. LPG engine Starter generator with 12 volt, 50 AMP battery Unit of box is 82″ O.D. Length of box is 120″ I.D….

Model AC-3TM

…be used for patching with hot asphalt. Container: Unit shall be 3 cubic yards Double wall constructed 2” – 6 lb. density insulation throughout 3/16 GA HR steel interior sides,…

Model DA-5HL

…be used for patching with hot asphalt. Container: Unit shall be 5 cubic yards Double wall constructed 2” – 6 lb. density insulation throughout 3/16 GA HR steel interior sides,…

Model L-200-T

…furnished complete and ready for mounting with pump and roller bearing power take-off that is suitable for continuous duty and all other items necessary to make a complete working unit….

Model L-200-CT

…pick up solid material without using the clam. Arms: They shall be straight type with box girder type construction. They shall have a minimum inside clearance of 92 inches. The…

Custom Dump Bodies

…exact needs. Product Images Features Center Tailgates Body Dividers Hydraulic Ditch Gates Shovel Aprons Rear Body Controls Swing-Out and Barndoor Tailgates Water-Tight Tailgate Compressors Vanair® Under Deck Compressors Vanair® Hydraulic…

Model L-100-C

…will be able to pick up solid material without using the clam. Arms: They shall be straight type with box girder type construction. They shall have a minimum inside clearance…